RC Helicopter 300C-PRO 470L DFC 6CH RTF One-key Return GPS H1 Flight Controller

Introduction

• The 300C Scale RC Helicopter is a super-simulation process. The scale of the real machine is reduced. The whole machine is scaled down according to the real machine. Most of it is made of alloy. The whole machine adopts an oxidation + sandblasting process, which is much more refined than ordinary airplane models. A lot more complicated. The whole machine adopts 6s power package, 1150W Motor, Platinum 60A V4 ESC, all metal high voltage steering gear.
• The intelligent version uses H1 Helicopter Flight Controller + GPS positioning.
• It can fly at a fixed point (using the fixed-point mode, you only need to control the direction, front, back, left, and right, up and down. You don’t need to manually control the balance, it can be operated by a single joystick, very stable, very easy to use).
• Accurate hovering (with GPS positioning, when using the fixed-point mode, both hands can be separated from the remote control, the aircraft will automatically hover at a fixed point without offsets, real fixed point, fixed height. No bombing).
• One-key return (pull the f switch, one-key return, the aircraft will automatically plan the nearest route and return to the top of the take-off location with basically zero distance error. Automatic slow and vertical landing, and automatically close the throttle after landing).
• Low-voltage automatic return to home (the flights control automatically returns to home after detecting low pressure. No operator operation is required. The process is the same as the one-key return. It is very good to prevent the explosion caused by low-voltage power failure).
• Signal interruption and return home (No signal interruption under normal circumstances, but if there is an accident, directly turn off the power of the remote control, and the aircraft will automatically press one button to return to home during the process of landing, which more comprehensively prevents the explosion).

Item Specification:

• Item: 300C RC Helicopter
• Battery: 5200mAh Battery(included)
• Body Length: 700mm
• Body Width: 125mm
• Body height: 230mm
• Main Blades Diameter: 360mm
• Main Blades Length: 820mm
• Main Blades Length: 69mm
• Tail Blades Diameter: 180mm
• Main Motor Gear: 13T
• Final Gear: 151T
• Tail Drive Main Gear: 56T
• Tail Drive Ratio: 15T
• Gear Ratio: 11:1:3.72
• Weight: 1480g(not include battery)
• Flying Time: 5-8 mins
• Flying Distance: About 1000m
• Battery Mount: 120*40*30mm

Features:

• With H1 Helicopter Flight Controller , Support GPS function.
• Support hover, self-stabilization and automatic calibration.
• Support helicopter head oriented flying.
• One-key return, low-voltage return, signal interrupt return
• 6CH 3D flying brings you amazing flying experience.
• 1000m flying distance and 8 mins flying time
• 2.4G 12CH Transmitter, supports low-voltage alarm, protects your helicopter better.

Packing List:

•  1 X RTF Helicopter With Remote Control